Tanque de almacenamiento de betún con quemador diésel YDL-40F y sistema de doble calefacción.

Note: Final sensor type, local voltage compatibility, pipeline layout and installation scope should be confirmed before ordering.

Características principales

Double Heating Matrix for Faster Bitumen Temperature Recovery

The YDL-40F combines diesel direct heating and thermal oil indirect heating. The diesel burner transfers heat through the combustion chamber and flue tubes, while thermal oil circulation supports indirect heat transfer and pipeline heat tracing. This dual heating layout is designed to improve temperature recovery after bitumen unloading and keep the stored bitumen in a pumpable condition.

Integrated Circulation to Reduce Cold Zones

The insulated 3QGB80×2-36 bitumen pump is not only used for external supply. It can also support unloading and internal circulation. Internal circulation helps reduce temperature stratification inside the tank and keeps bitumen closer to a uniform working state before it is supplied to asphalt mixing plants or bitumen processing equipment.

Thermal-Oil Heat Tracing for Pump and Pipeline Protection

Bitumen pipelines are prone to blockage when temperature drops below the required pumping range. The YDL-40F includes DN25 thermal oil heat-tracing support for the bitumen pump and pipeline. This allows hot thermal oil to preheat key transfer sections and reduce the risk of cold-start blockage during site operation.

Heavy-Duty Tank Structure for Long-Term Site Operation

The tank body uses 5mm steel plate, the end plate uses 8mm steel plate, and the combustion chamber uses a 12mm structure with a 70mm external thermal-oil jacket. Together with Φ159 seamless steel heating tubes, 50mm rock wool insulation and 0.5mm corrugated outer cladding, the tank is built for heavy road construction and asphalt plant working conditions.

Automatic Temperature Control with Burner Interlock Logic

The system uses automatic temperature controllers for bitumen and thermal oil. The burner can start and stop according to the set temperature limits, and the thermal oil circulation pump should be started before burner heating. This interlock logic helps protect the heating system and supports safer temperature management during daily operation.

Container-Friendly Export Layout

The YDL-40F is designed with an integrated base and export-friendly overall dimensions. The complete unit can be loaded into one 40HQ container, making it suitable for overseas asphalt plant projects, bitumen storage systems and road construction equipment supply.